Why Are The Villa Folding Doors Praised For Their Quality And Form?

The beautiful scenery outside the middle door gives people a sense of tranquility. The folding door perfectly sets off this scene, making the whole picture more beautiful and harmonious. It really corresponds to this scene; whether in terms of color or style, this folding door is just right for this.

Now many folding doors on the market are made of glass. Glass folding doors are an artistic expression and are favored by many of our families. According to the production process, we can divide glass into: embossed glass, forged glass, wonderful glass, glazed glass, wired glass, polycrystalline glass, glass mosaic, shadowless glue glass and tempered glass.

The glass doors made of differences in growth technology are praised for their quality and form. The sliding folding door adopts the most advanced design scheme in Europe. The upper hanging rail + lower rail slides at the same time with stronger load-bearing capacity, making the whole door smooth and noiseless when pushed and pulled. The folding design maximizes the opening space, allowing you to fully see the external landscape, making the indoor and outdoor unobstructed, with a wide field of vision, and playing a good decorative role while partitioning.

Installation of villa folding doors:

1. Push the folding door as a whole into the door opening, determine the front and rear positions, fold the door leaf in the middle of the door frame, and screw a few support screws next to the door frame to fix the upper and side walls of the door frame.

2. Align the impact drill bit with the corresponding holes on the upper, middle, and lower positions of the left and right door frames, and drill a 5mm diameter hole on the inner wall of the door opening, about 10mm deep, then loosen the support screws and take the folding door out of the door opening as a whole.

3. Align the 7mm diameter impact drill bit with the 5mm diameter wall hole on the inner side of the door opening, expand the hole with a diameter of 7mm to a depth of about 40mm, and then drive the six rubber sleeves into the above holes.

4. Push the folding door as a whole into the door opening again, find the center of the rubber hole, and use a screwdriver to screw the self-modifying screw into the above rubber sleeve holes to tighten the door frame.

5. Open the door leaf in the middle of the door frame, tighten the screws of the hanging wheel groove block above the folding door with screws, insert the clamping plate into the shaft below the folding door, and tighten the screws.