Smart Courtyard Gate Manufacturers Teach You Six Tips For Maintaining Courtyard Villa Gates

1. Remove oil stains on wooden doors: residual tea is an excellent cleaner. After applying, spray a small amount of cornstarch to wipe it, and finally wipe the cornstarch clean. Cornstarch can absorb dirt on the surface of the door and make the paint smooth and bright.

2. Remove ink stains on courtyard villa gates: add two parts of white vinegar to one part of water, use a sponge to wipe the ink on the wooden door with the mixture, then clean and dry it.

3. Treatment of yellowing of white courtyard villa gates: the white paint on the surface of the furniture will turn yellow over time. You can wipe it with a rag dipped in toothpaste, but be careful not to use too much force; you can also mix two egg yolks, apply them to the yellowed area with a soft brush, and wipe them carefully with a soft cloth after drying.

4. Treatment of scratches on courtyard villa gates: If the furniture is accidentally scratched, but the wood below the paint film is not touched, you can use a soft cloth dipped in a little melted wax liquid, apply it to the paint film injury, and cover the scratches.

5. Paint film burn repair method: If the furniture is accidentally burned by cigarette butts, ashes or unextinguished matches, leaving burn marks, you can wrap a chopstick head with a small piece of fine-grained hard cloth, gently wipe the burn marks, and then apply a thin layer of wax liquid to remove the burn marks.

6. There is a watermark under the paint film: Just cover the water mark with a clean wet cloth, and then carefully press the wet cloth with an iron, so that the water accumulated in the watermark will evaporate and the watermark will disappear.

What are the steps for the installation of the courtyard gate by the smart courtyard gate manufacturer?

1. Cleaning the site: Before installing the courtyard gate, it is limited to a simple cleaning of the construction site. Generally speaking, only if there are no impurities and dust at the installation site, the installation effect of the courtyard gate can be well guaranteed.

2. Assembling the door cover: Before assembling the door cover, be sure to check its accessories in advance. After ensuring that there are no problems with the overall accessories, assemble the door cover according to the drawings. However, remember to pay attention to the overall connection effect and flatness of the door frame during assembly.

3. Marking and punching: After assembling the door cover, you must also accurately measure its overall width and length. Only after measuring the distances of the courtyard gate, put the door cover into the door opening and then hang the feet. Generally, when the door cover is determined, you can punch holes. Punch holes according to the size of the screws, generally expansion screws are used.

4. Fix the door cover: The door cover is fixed according to the hanging line. To determine the overall vertical effect and the overall requirements, fix the door cover and the wall with screws.

5. After the door cover is installed, remove the door blocking line and apply white latex. Then install the door leaf and hardware step by step.